How Do You Drain a Torque Converter?

5月10日,19、 Torque Fluid· 没有评论

逐步指示排放Torque Converter.

Since aTorque Converter,(T-Converter) is your transmission's number one assistant,a well cared for T-Converter makes for a happy transmission.A misbehaving T-Converter can cause transmission slippage,stalling,奇怪的噪音和更严重的车辆变速器损坏。Over time,debris from disintegrating internal moving parts can contaminate the transmission oil and prevent the T-Converter from working effectively,从而导致变速器损坏。Taking the extra step to include a good flush of the T-Converter is a good idea since it is not normally included in a standard transmission oil change.T型变矩器的目的是帮助车辆的自动变速器性能良好,并提供平稳和无忧无虑的换档体验。A flush of the T-Converter can be a quick and easy process,然而,某些车型可能会面临一些挑战。这完全取决于车辆变速器油接头线路上的连接类型。

扭矩油排放

让我们从检查变速箱油开始确定if需要冲洗车辆的T型转换器机油。如果在检查变速箱油时发现碎屑颗粒,然后变速箱和T型变矩器可能需要更换机油。By being主动you can extehnd the life of the transmission,而不是拖延和招致昂贵的维修。让我们详细看看如何Draina T-Converter's oil.

Tools needed to complete the job:
Bucket (oil drainage)
Funnel
Flare工具(取决于品牌和型号)
变速箱油(需要额外的油)
Socket wrench
Screw Driver
Vehicle's manual

Step 1
2方法of preforming this task.(depends on vehicle make/model.请参阅车辆手册以确定预成型的方法。)

方法a.断开变速器冷却管路。(通常连接到散热器上,但检查汽车手册中车辆的特定位置。

Verify the tools needed to remove the vehicle's cooling line by referring to the car's manual,扩口工具may be需要。The engine flex plate may need to be removed to gain access to the transmission ‘return‘ cooling line.冷却管路的位置和类型可能因车辆的品牌/型号而异。There are two lines connected to the transmission.One is thecooler line另一个叫做回流管.You will be disconnecting the回流管.Check your manual to determine which line is the return line for your vehicle's make/model.

See also: Repair Transmission and Torque Converters and Return to Productivity

方法B.On some models the oil will be drained directly from T-Converter "bell housing".下一步是找到T型转换器。通常,T型变矩器位于变速箱泄油盘和汽车底盘上的发动机柔性板之间。Rotate the T-Converter until you are able to view the hex nut opening.一旦找到十六进制opening,使用适当尺寸的六角工具拧下六角,直到油塞完全拆下。

Step 2
将铲斗或油底壳放在变速箱冷却管路或T形变矩器下方(取决于方法),使变速箱处于空档。下一步,起动发动机。

Step 3
方法a.倾倒Newtransmission oil inside the dipstick of the transmission.At the same time,allowing the old oil to drain into your waiting bucket.(这项任务需要充足的额外的传动油供应。)

方法B.跳过步骤3。Since,变速箱油直接从T形变矩器中排出。

Step 4
方法a.有一个助理通过每个档位和同时缓慢换档变速器中的档位Fresh发动机运转时,变速箱油继续倒入变速箱油尺。确保停车制动器已打开。Essentially,步骤4is recycling the old transmission oil from the transmission and T-Converter and replacing it with new fresh oil.

方法B.Skip步骤4,因为变速箱油直接从变矩器中排出。

Step 5
方法A和B都会Test drivethe car a few mile and then recheck the transmission oil level,一旦你对旧的石油感到满意完全排空from transmission and the transmission is now refilled with new,新鲜油达到适当的水平。

See also: How Does Torque Fluid Work?

结论:
*T转换器的内部零件不断旋转,while the vehicle is in motion.它与变速器相连,负责车辆的运动。It requiresclean oilto operate at its best.Maintaining your transmission and T-Converter by flushing the oil regularly will definitelyadd to the life of the vehicle.

*最好的汽油里程当变速箱和发动机在Speed.作为oil agesand becomescontaminated具有metal shaving,dirtand碎片the spinning of the T-Converter canslow down.This results in降低效率of the transmission and T-Converter.

*Replacementof the T-Converter may be necessary if it has sustainedserious damage.对于车主来说,主动处理与变速器有关的任何问题是符合其最佳利益的。积极主动可以真正节省你的钱包,因为T型转换器的更换比整个传动系统的大修成本要低得多。

Please follow and like us:

Leave a Reply

Your email address will not be published.Required fields are marked*